|
BANDSAW LX-530DC
| MODEL |
LX - 210 |
LX - 300 |
LX - 400 |
LX - 530 |
LX - 650 |
LX - 800 |
LX - 1000 |
LX - 1200 |
| Cutting Capacity |
|
|
|
|
|
|
|
|
| Round - In mm |
210 |
300 |
400 |
530 |
650 |
800 |
1000 |
1200 |
| Square In mm |
210 X 210 |
300 X 300 |
400 X 400 |
530 X 530 |
650 X 650 |
800 X 800 |
1000 X 1000 |
1200 X 1200 |
| Cutting Speed mtlmin |
20 - 80 |
20 - 80 |
20 - 80 |
15 - 75 |
15 - 75 |
15 - 75 |
15 - 75 |
15 - 75 |
| Blade Size mm |
4100 X 34 X 1.1 |
4570 X 41 X 1.3 |
5450 X 41 X 1.3 |
6900 X 54 X 1.6 |
8000 X 67 X 1.6 |
8800 X 67 X 1.6 |
12300 X 80 X 1.6 |
13900 X 80 X 1.6 |
| Saw Motor Capacity H.P. |
2 Hp |
3 Hp |
5 Hp |
7.5 Hp |
10 Hp |
12.5 Hp |
15 Hp |
20 Hp |
| Hyd Motor Capacity HP. |
1 Hp |
1Hp |
1 Hp |
|
|
|
|
|
BLADE GUIDES : The Guide ensure accurate cutting &
long blade life. They are factory set. It consists of spring loaded,
self- adjusting carbide-faced inserts. Adjustment screws are provided
to allow easy blade changing. The blade is guided by Roller bearing
& Carbide wear pads.
SAW FEED: Saw head "up &
down' motion is controlled by hydraulic cylinder and regulated by a
pressure compensated Flow control Valve.
JOB CLAMPING:
This is controlled by hydraulic cylinder & valves. The jaws of the
front & Rear vices are in one straight line and perpendicular to
the Blade. The Movement of jaws of both the vices are controlled by
hydrauliccylinderS Valves.
SPLIT FRONT VICE : This unique
vice design permits the workpiece to be automatically indexed to a
Reduce remnant of 50mm only. The vice securely clamps the workpiece on
both side of the cut thus minimizing drop-off burrs. This design is
most suitable for nesting or bundle cutting and is ideal for cutting
short length pieces.
AUTO LENGTH INDEXING & LENGTH COUNTER:
The Automaticfeeding of job is aisodone by indexing. The feed length
can set by means of Screw & Digital counter assembly with length
accuracy of /- 0.2mm. The handwheel is provided to set the cutting
length upto 400mm which can be read on digital counter in increment of
0.1mm. The multiple stroke makes it possible to multiply the number of
index cycles when pieces longerthan 400mm are required. (Available in
DCAAutomatic models).
NESTING FIXTURE / BUNDLE CLAMPING:
ANesting fixture set consists of hydraulicaly operated vertical clamps
which are mounted on the rear and the front vices. This makes it
possible to cut multiple pieces at a time.
|
