|
FULLY AUTOMATIC HYDRAULIC DOUBLE COLUMN METAL CUTTING BANDSAW MACHINE
SAW HEAD: Saw head unit is supported by two rigid hard-chrome plated & ground vertical columns, which are guided by "INA" make
PTFE self lubricated Bushes. The blade is guided by Bearings &
Carbide wear pads. The blade can be tightened and released Hydraulicly.
The blade is hydraulicly tightened upto recommended tensile strength of
the saw blade. The saw is driven by sufficient drive power to cut
material.
AUTO WORK HEIGHT CONTROL: The quick approach
arm eliminates the need for the operator to manually adjust the blade
height to accommodate different sizes the material. The blade will
approach the material rapidly until the arm make contact, when the saw
starts cutting.
| MODEL |
LX - 210 |
LX - 300 |
LX - 400 |
LX - 530 |
LX - 650 |
LX - 800 |
LX - 1000 |
LX - 1200 |
| Cutting Capacity |
|
|
|
|
|
|
|
|
| Round - In mm |
210 |
300 |
400 |
530 |
650 |
800 |
1000 |
1200 |
| Square In mm |
210 X 210 |
300 X 300 |
400 X 400 |
530 X 530 |
650 X 650 |
800 X 800 |
1000 X 1000 |
1200 X 1200 |
| Cutting Speed mtlmin |
20 - 80 |
20 - 80 |
20 - 80 |
15 - 75 |
15 - 75 |
15 - 75 |
15 - 75 |
15 - 75 |
| Blade Size mm |
4100 X 34 X 1.1 |
4570 X 41 X 1.3 |
5450 X 41 X 1.3 |
6900 X 54 X 1.6 |
8000 X 67 X 1.6 |
8800 X 67 X 1.6 |
12300 X 80 X 1.6 |
13900 X 80 X 1.6 |
| Saw Motor Capacity H.P. |
2 Hp |
3 Hp |
5 Hp |
7.5 Hp |
10 Hp |
12.5 Hp |
15 Hp |
20 Hp |
| Hyd Motor Capacity HP. |
1 Hp |
1Hp |
1 Hp |
|
|
|
|
|
BLADE GUIDES: The Guide ensure accurate cutting & long
blade life. They are factory set. It consists of spring loaded, self-
adjusting carbide-faced inserts. Adjustment screws are provided to
allow easy blade changing. The blade is guided by Roller bearing &
Carbide wear pads.
SAW FEED: Saw head "up & down'
motion is controlled by hydraulic cylinder and regulated by a pressure
compensated Flow control Valve.
JOB CLAMPING: This is
controlled by hydraulic cylinder & valves. The jaws of the front
& Rear vices are in one straight line and perpendicular to the
Blade. The Movement of jaws of both the vices are controlled by
hydrauliccylinderS Valves.
SPLIT FRONT VICE: This unique
vice design permits the workpiece to be automatically indexed to a
Reduce remnant of 50mm only. The vice securely clamps the workpiece on
both side of the cut thus minimizing drop-off burrs. This design is
most suitable for nesting or bundle cutting and is ideal for cutting
short length pieces.
AUTO LENGTH INDEXING & LENGTH COUNTER:
The Automaticfeeding of job is aisodone by indexing. The feed length
can set by means of Screw & Digital counter assembly with length
accuracy of /- 0.2mm. The handwheel is provided to set the cutting
length upto 400mm which can be read on digital counter in increment of
0.1mm. The multiple stroke makes it possible to multiply the number of
index cycles when pieces longerthan 400mm are required. (Available in
DCAAutomatic models).
|
